Description
This Harmony RE17R timing relay can be set between 0.1 seconds and 100 hours, has an output rating of 8A, is 17.5mm wide and can be supplied with 24V DC, 24V to 240V AC. It also has 1 changeover contact SPDT (single pole double throw). It has one of market slimmest form-factors, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 1-pole DIN device. It also offers a sealable cover, simple and precise settings with rotary trimmers. Multi function timer for a simple integration in hard-wired logic schematics, ideal for refurbishment of old installations without using a PLC.
SPECIFICATIONS:
|
Range of product |
Harmony Timer Relays |
|
Product or component type |
Multifunction relay |
|
Discrete output type |
Relay |
|
Width |
17.5 mm |
|
Device short name |
RE17R |
|
Time delay type |
Power on-delay On-delay and off-delay Interval Off-delay Symmetrical flashing |
|
Time delay range |
6...60 min 1...10 h 0.1...1 s 1...10 s 1...10 min 10...100 h 6...60 s |
|
Nominal output current |
8 A |
|
Contacts type and composition |
1 C/O |
|
Contacts material |
Cadmium free |
|
Height |
90 mm |
|
Depth |
72 mm |
|
Control type |
Selector switch front panel |
|
[Us] rated supply voltage |
24...240 V AC 50/60 Hz 24 V DC |
|
Voltage range |
0.85...1.1 Us |
|
Supply frequency |
50...60 Hz +/- 5 % |
|
release of input voltage |
10 V |
|
Connections - terminals |
Screw terminals, 1 x 0.5...1 x 3.3 mm² (AWG 20...AWG 12) solid without cable end Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 14) flexible with cable end Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end |
|
Tightening torque |
0.6…1 N.m conforming to IEC 60947-1 |
|
Housing material |
Self-extinguishing |
|
Repeat accuracy |
+/- 0.5 % conforming to IEC 61812-1 |
|
temperature drift |
+/- 0.05 %/°C |
|
voltage drift |
+/- 0.2 %/V |
|
Setting accuracy of time delay |
+/- 10 % of full scale at 25 °C conforming to IEC 61812-1 |
|
control signal pulse width |
100 ms with load in parallel typical 30 ms typical |
|
Insulation resistance |
100 MOhm at 500 V DC conforming to IEC 60664-1 |
|
Reset time |
120 ms on de-energisation typical |
|
On-load factor |
100 % |
|
Power consumption in VA |
0…32 VA at 240 V AC |
|
Maximum power consumption in W |
0.6 W at 24 V DC |
|
Minimum switching current |
10 mA at 5 V DC |
|
Maximum switching current |
8 A AC/DC |
|
Maximum switching voltage |
250 V AC |
|
Breaking capacity |
2000 VA |
|
operating frequency |
10 Hz |
|
Electrical durability |
100000 cycles (8 A at 250 V AC maximum) for resistive load |
|
Mechanical durability |
10000000 cycles |
|
Dielectric strength |
2.5 kV 1 mA/1 minute 50 Hz conforming to IEC 61812-1 |
|
[Uimp] rated impulse withstand voltage |
5 kV during 1.2/50 µs |
|
power on delay |
100 ms |
|
Marking |
CE |
|
Creepage distance |
4 kV/3 conforming to IEC 60664-1 |
|
Safety reliability data |
B10d = 270000 MTTFd = 296.8 years |
|
Mounting position |
Any position in relation to normal vertical mounting plane |
|
Mounting support |
35 mm DIN rail conforming to EN/IEC 60715 |
|
Local signalling |
LED indicator for on steady: relay energised, no timing in progress LED indicator for flashing: timing in progress 80 % ON and 20 % OFF LED indicator for pulsing: relay de-energised, no timing in progress (except function Di-D, Li-L) 5 % ON and 95 % OFF |
|
Net weight |
0.07 kg |
|
Time delay type |
A, Ac, At, B, Bw, C, D, Di, H, Ht |
|
Functionality |
Multifunction |
|
Compatibility code |
RE17 |
|
immunity to microbreaks |
20 ms |
|
Standards |
2006/95/EC 2004/108/EC IEC 61812-1 EN 61000-6-2 EN 61000-6-3 EN 61000-6-4 EN 61000-6-1 |
|
Product certifications |
CSA GL cULus |
|
Ambient air temperature for storage |
-30…60 °C |
|
Ambient air temperature for operation |
-20…60 °C |
|
IP degree of protection |
IP20 (terminal block) conforming to IEC 60529 IP40 (housing) conforming to IEC 60529 IP50 (front panel) conforming to IEC 60529 |
|
Vibration resistance |
20 m/s² (f= 10…150 Hz) conforming to IEC 60068-2-6 |
|
Shock resistance |
15 gn for 11 ms conforming to IEC 60068-2-27 |
|
Relative humidity |
93 % without condensation conforming to IEC 60068-2-30 |
|
Electromagnetic compatibility |
Electrostatic discharge immunity test: (in contact), level 3, 6 kV, conforming to IEC 61000-4-2 Electrostatic discharge immunity test: (in air), level 3, 8 kV, conforming to IEC 61000-4-2 Susceptibility to electromagnetic fields: (80 MHz to 1 GHz), level 3, 10 V/m, conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test: (capacitive connecting clip), level 3, 1 kV, conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test: (direct), level 3, 2 kV, conforming to IEC 61000-4-4 1.2/50 µs shock waves immunity test: (differential mode), level 3, 1 kV, conforming to IEC 61000-4-5 1.2/50 µs shock waves immunity test: (common mode), level 3, 2 kV, conforming to IEC 61000-4-5 Conducted RF disturbances: (0.15...80 MHz), level 3, 10 V, conforming to IEC 61000-4-6 Voltage dips and interruptions immunity test: (1 cycle), 0 %, conforming to IEC 61000-4-11 Voltage dips and interruptions immunity test: (25/30 cycles), 70 %, conforming to IEC 61000-4-11 Conducted and radiated emissions: , class B, conforming to EN 55022 |
|
Unit Type of Package 1 |
PCE |
|
Number of Units in Package 1 |
1 |
|
Package 1 Height |
2.600 cm |
|
Package 1 Width |
7.800 cm |
|
Package 1 Length |
9.500 cm |
|
Package 1 Weight |
80.000 g |
|
Unit Type of Package 2 |
S02 |
|
Number of Units in Package 2 |
40 |
|
Package 2 Height |
15.000 cm |
|
Package 2 Width |
30.000 cm |
|
Package 2 Length |
40.000 cm |
|
Package 2 Weight |
3.690 kg |
|
Unit Type of Package 3 |
P06 |
|
Number of Units in Package 3 |
640 |
|
Package 3 Height |
75.000 cm |
|
Package 3 Width |
60.000 cm |
|
Package 3 Length |
80.000 cm |
|
Package 3 Weight |
65.700 kg |
Reviews
There are no reviews yet.